Cubicle shelves – First, prepare the wood. Sand boards until they are free of splinters, burrs and manufacturing brands. Sand with the grain when possible. Second, measure and mark the frame. Create dado guidelines shelves on the frame. Measure and mark the columns support. Add dado guidelines shelves on columns support. Create top score of the first. Drag the bottom of the first shelf one inch below the top mark.
Creating top score of the second shelf 12 inches under the trademark base of the first cubicle shelves. Draw the bottom mark for the second shelf 1 inch below the top mark. Repeat for the third and fourth shelves. Repeat the process for each column, support and mirror these brands on the other side of the boards. Measure and mark the shelf itself. Cutting-quarter-inch-deep dadoes columns frame and support for your shelving brands using the router. Place the board so you can push the router away from you when you cut dado. Use smooth, steady strokes and dado cutting across the entire wide side of the timber.
12 Photos Gallery of: Make a Nice Cubicle Shelves
Cutting boards on your labels using the miter saw. Do not cut along dadoes. At each end of the four frame members, creating a miter joint. Place the board on the edge of its length and making a 45-degree cut from the outside corner. Repeat this on the other end of the board. Both collections must be on the same surface as dadoes. Assemble the frame. Set the columns supporting vertically dadoes in the frame. Then substitute the shelves horizontally into dadoes columns support and frame. Finally, add books or other objects to be displayed. And a nice cubicle shelves was done.